For determining the central position of the Pallet Clamper H 4202 and of A-Axis H 80R.NC.
|
|
|
For determining the central position of the Pallet Clamper H 4202 and of A-Axis H 80R.NC. |
 |
H 4417 Adapter The Adapter H 4417 is the link between the Pallets H 4005, H 4100 and H 4110 and the Swiveling Unit H 4415 or the Pallet Clamper H 4202. Weight 1.3 kg (2.9 lbs) |
 |
The Adapter H 4201 is the link between the Fixturing Systems 4000 and 2000. It is mounted either to the M-Pallet H 4005, P-Pallet H 4105 or the 3D-Pallet H 4110. Allows most workpiece holders of the System 2000 to be integrated into the System 4000. Weight of the adapter: 1 kg (2.20 lbs) |
 |
For clamping the multiholder of the Fixturing System 2000 on the- basic beams B 40 .... The adapter can be mounted with three screws to the basic! beam, in steps of 25 mm (1 "). |
 |
H 2417 Adapter
The Adapter H 2417 is the link between the Multiholders H 24610 or H 2465 of the Fixturing System 2000 and the Swiveling Unit H 4415 or the Pallet Clamper H 4202. |
 |
H 2495 Adapter
The Adapter K2495 is the link between the Fixturing Systems 2000, and 4000. For mounting directly to the faces of the Multiholders H 2480, H 248~5, Adapter HA 2430, Vertical Unit H 2725 and to the Swivel Unit H 2700 shown in the System 2000 catalogue6,,. Allows all System 4000 workpiece holders shown ini this catalogue (with the exception of H4410 and HA415) to be used in HIRSCHMANN's Fixturing System 2000. This adapter, also fits on the Vertical Unit H 4410 and on the Swiveling Unit H 4415. A direct mounting of the workpiece holders of the System 4000 to these units is possible. |
 |
For mounting the pallets of the Fixturing System 4000 to the Clampers H 8.811, H 8.812 etc. of the Fixturing System 5000. |