H 4300 "B" Beam Clamper (manual)
Manual clamper for the precise positioning of the M-Pallets H 4005 (clamping of P- and 3D-pallets is possible too). Incorporates HIRSCHMANN's well-known centering noses or Vee blocks and Z-supports. Central clamping by means of M 8 bolt.
The manual clamper is provided with a securing latch for collision-free positioning of the pallets with aligned workpieces.
This clamper, or several clampers, are screwed with three screws on the "B" beam, at any position in steps of 25 mm (11 ").
Perm. workpiece weight, with
workpiece holder 35 kg (77.17 lbs)
Positioning and repetitive accuracy < 0.002 mm (0.00008")
The Basic Set contains one H 4300 M Clamper.
H 4000 M-Clamper (manual)
Manual clamper as H 4300, but for mounting to the machine table. Front surface is ground for axis alignment.
The securing latch is equipped with two positioning pins which make the manual positioning of the pallets easier.
Perm. workpiece weight, with
workpiece holder 35 kg (77.17 lbs)
Positioning and repetitive accuracy < 0.002 mm (0.00008")
H 4100 P-Clamper (pneumatic)
Pneumatic clamper with central power clamping for the automatic or manual positioning of the H 4105 Pallets and H 4110 3D-Pallets. The pneumatic clamper is provided with a securing latch for collision-free positioning of the pallets with aligned workpieces during manual operation.
This clamper is normally used for the automatic workpiece change with the EROBOT Workpiece Changer.
Perm. workpiece weight, with
workpiece holder 35 kg (77.17 lbs)
Position ing/repetitive accuracy < 0.002 mm (0.00008").
Compressed air, min. 6 bars
3 m (3.28 yd) plastic hose, Ø 4 mm (0.16") are included in the delivery.
H 4101 Pneumatic Control Unit
Manual control unit (valve) for activating the functions (opening, clamping, cleaning) of Pneumatic Clamper H 4100.
Compressed air, min. 6 bars