H 4005 M-Pallet
 For the manual changing of workpieces held in all holders of System 4000. "Quick" clamping to the clampers H 4000 and H 4300 via a 8 mm cylinder screw.
Two axis leveling is standard.
Most System 2000 holders can be used via the Adapter H 4201 (see page 17).
Max. workpiece weight,
workpiece holder included 30 kg (66.14 lbs)

H 4105 P-Pallet
 For the automatic and manual changing of workpieces
held in all holders of System 4000. "Quick" clamping to
the P-Clamper H 4100, the M-Clamper H 4000 and the
"B" Beam Clamper H4300.
Two axis leveling is standard.
System 2000 holders can be used via the Adapter
H 4201 (see page 17).
Max. workpiece weight,
workpiece holder included 30 kg (66.14 lbs)
Weight of the pallet: 1.5 kg (3.30 lbs)

H 4110 M 3D-Pallet (for M-Clarnper) H 4110 P 3D-Pallet (for P-Clamper) 
For the manual and automatic changing of workpieces held in all holders of System 4000. "Quick" clamping to the P-Clamper H 4100 the M-Clamper H 4000 and the
"B" Beam Clamper H 4300.
Three axis leveling is standard.
Max. workpiece weight,
workpiece holder included 30 kg (66.14 lbs)
Weight 2.2 kg (4.8 lbs)
H 4260 Pallet Extension Unit
 The workpiece holder can be extended by 45 mm (1.76"). Especially recommended if vise H 4620.2 shall be used.
H 4120 Reference Pallet
 For the transmission of the workpiece position (with reference to the reference bore of the H 4120) from the measuring machine to the Wire EDM and for the alignment and check of the position of the clampers at the longitudinal side of the reference pallet, rectangular ground to the positioning Vee block.