logo_head.gif (1848 bytes) Hirschmann_logo_part.gif (2589 bytes)
HIRSCHMANN Fixturing System 4000
  • high precision and versatility for workpiece weights
    up to 100 kg/220.5 lbs
  • solid and not susceptible to shocks or vibration
  • consistent accuracy
  • positive connection of the tool plane
  • 0.002 mm (0.00008") repetitive accuracy
  • rust-resistant
  • not affected by dirt
  • not affected by heat. The center will be kept, even in case of an extreme temperature rise (cross hair centering)
  • Compatible with all HIRSCHMANN Systems


Operation
Most tools are supplied with an operating manual. Correct operation cannot be guaranteed and danger to personnel and rnachine cannot be excluded unless these operating instructions and information given in this catalogue are observed.

Precision
The individual tool planes incorporate hardened and precision ground centering Vee blocks and separate Z- supports. This assures position centering of each tool. A repetitive accuracy (consistency) of < 0.002 mm (0.00008") is achieved

Maintenance and Service
Since the fixturing system is subject to chemical and physical influences, maintenance and service has to be performed with special care.

The current flow requires a. good connection (contact) between the beams and workpiece holders. The conductivity of the water and chlorides normally contained in the water, can influence the rust-resisting property of the Fixturing Systems.

Residues from the electrical discharge process, especially copper particles which can develop secondary EDMing (corrosion), have to be removed once a day. Only use a clean and soft cloth. Do not use grease or oil.


Technical Modifications
All products shown in this catalogue are subject to continuous further developments. We reserve the right for technical modifications.

Quality according to DIN EN ISO 9001
All HIRSCHMANN products are produced using the latest production methods, and are subject to quality assurance measures as per DIN EN ISO 9001 both during production and in the final product stage.


Warranty
We provide a 12-months warranty for all Fixturing System parts, starting from the invoice date, and assuming correct use and maintenance as specified.

The warranty is restricted to replacement or repair of any defective parts free of charge. Claims going beyond that shall not be considered.

Warranty claims shall be submitted without delay within 12 months and in writing.

logo_head.gif (1848 bytes)
Previous

logo_head_flipped.gif (1090 bytes)
Next
logo_head.gif (1080 bytes)

4000 Index    Corrosion Inhibitors    See HIRSCHMANN's full line of EDM Products (home)     E-Mail HIRSCHMANN     Regional Offices