|
|
 |
Beam Vise Kit consisting of: H 4312 Solid Jaw, H 4312.1 Clamper For collision-free clamping of parallel workpieces direct ly on the cross beam. Larger cylindrical workpieces are clamped against the second cross beam using the beveled faces (secured by the Adjustable End Stop H 4320). Presetting of the workpiece can be done on a granite surface plate. Max. workpiece weight of parallel workpieces with a max. depth of 130 mm (5.12") 30 kg (66.15 lbs) Max. workpiece weight with support plate at opposite cross beam 100 kg (220.46 lbs) Max. workpiece weight of cylindrical parts against second cross beam, with 4 support plates 30 kg (66.15 lbs) |
|
H 4331 Clamping Beam For collision-free clamping of rectangular workpieces and, supplemented by the set of Vee block, also for the collision- free clamping of cylindrical workpieces, directly on the cross beam. If a Uniholder H 4231 is provided, the clamping beam is not required, as these parts are already contained in the uniholder. Max. permissible workpiece weight 8 kg (17.64 lbs) |
H 4332 Set of Vee Blocks (2 pcs.) The preliminary setting of the workpiece can be done on the granite surface plate. |
 |
 |
H 4315 Support Holders (3 pcs.) The support holders are attached to the cross beams and are mainly for clamping thin, round and rectangular workpieces. For heavy workpieces it is recommendable to sustain the support holders with the Support Plates H 4366. The clamping range can be extended by replacing the clamping screw with other lengths in Clamping Jaw Set H 2850. The workpiece is leveled by means of the adjustment elements of the cross beams. Maximum load 30 kg (66.13 lbs) |
 |
4000 Index Corrosion Inhibitors See HIRSCHMANN's full line of EDM Products (home) E-Mail HIRSCHMANN Regional Offices |
