page11

H 4255 Insulating Set (3 pcs.)
Consisting of two small ceramic insulating plates each to be put between the cross beams, the support plates H 4366 and the workpiece to be insulated and one insulated clamping jaw each.

The current leads have to be connected directly to the workpiece.

H 4250 Insulating Unit
For the electrical insulation between the Pallets H 4005, H 4100, H4110 and the workpiece holders to insulate the workpiece from the machine table. The current leads are connected directly or to the lateral front part of the insulating unit.

Max. perm. workpiece weight(with holder) 15 kg (33.07 lbs)

Weight 1 kg (2.20 lbs)

11-4.gif (13412 bytes)

H 4536 Vertical Chuck Jaw
For mounting flat workpieces, up to 25 mm (11") in
height with end stops on the side.

To avoid collision with the lower wire nozzle, the height
of the workpiece support can be adjusted by using the
spacer plate (6 mm/0.236" dia.).

Weight of the chuck jaw 1.4 kg (3.0 lbs)

H 4540 Vertical Chuck Jaw
For mounting rectangular or square workpieces, up to 100 mm (3.937") in height and about 60 mm (2.362") in depth.

The clamping jaws are infinitely adjustable and secured by the screw on the side. Removable end stops provided on the side.

Workpiece clamping takes place via the hexagon clamping device, which secures the workpiece using a screw with an eccentric head.

To avoid collision with the lower wire nozzle, the height of the workpiece support can be adjusted by using the distance plate (6 mm/0.236" dia.).

Delivery includes Set with 3 clamping jaws

Clamping range: 0-25/50, 50-75, 75-100 mm. (0-0.98/1.968", 1.968-2.952", 2.952-3.937")

Weight of the vertical chuck jaw is 1.7 kg (3.74 lbs)

4000 Index Corrosion Inhibitors See HIRSCHMANN's full line of EDM Products (home) E-Mail HIRSCHMANN Regional Offices