|
|
 |
H 4410 Vertical Unit For "quick" clamping directly to the H 4415 Swivelling Unit and/or the H 4202 P-Clamper. It has a vertical adjustment and is used for the Pallets H 4005, H 4100 or H 4110. The Pallets H 4005, H 4105 and H 4110 can be clapmed through the Pallet Clamper H 4202, with the corresponding workpiece holder. All electrode holders of the Fixturing System 5000 can be mounted in any desired position. All workpiece holders of the Fixturing System 4000 can be mounted directly using the Adapter H 2495. Adjustment range: 65 mm (2.56") |
 |
H 4415
Swivelling Unit For mounting directly to the H 4410 Vertical Unit or the Adapter H 4417 allowing 360' of continous radial adjustment. Angles can be set and locked using a vernier scale the Sine Bar H 4416. Mounting holes are provided the H 4202 Pallet Clamper (described below) or H 2495 Adapter (H 4416 Sine Bar is not included) Weight 2 kg (4.4 lbs)
|
  |
H 4202
Pallet Clamper For mounting directly to either the Swivelling Unit H 4415, the Adapter H 4417 or the machine table. Can also be mounted at 900 to the face of these units and to either the H 4005 M- Pallet or the H 4105 P-Pallet The position of the Vee block center to the exterior surfaces is engraved on the face. It can also be found with the Reference Pallet H 4203. Weight 1.3 kg (2.9 lbs) H 4205 Adapter Peg The Pallets H 4005, H 4105 and H 4110 can be clamped with this adapter peg, which is clamped to the Pallet Clamper H 4202. |
 |
H 4203 Reference Pallet For determining the central position of the Pallet Clamper H 4202 and of A-Axis H 80R.NC. |
 |
4000 Index Corrosion Inhibitors See HIRSCHMANN's full line of EDM Products (home) E-Mail HIRSCHMANN Regional Offices |
