|
|
 |
H 4380 Adapter For clamping the multiholder of the Fixturing System 2000 on the basic B 4000 series beams .... The adapter can be mounted with three screws to the basic beam, in steps of 25 mm (1 "). |
 |
H 2417 Adapter The Adapter H 2417 is the link between the Multiholders H 2480 or H 2485 of the Fixturing System 2000 and the Swivelling Unit H 4415 or the Pallet Clamper H 4202. |
 |
H 2495 Adapter The Adapter H 2495 is the link between the Fixturing Systems 2000 and 4000. For mounting directly to the faces of the Multiholders H 2480, H 2485, Adapter HA 2430, Vertical Unit H 2725 and to the Swivel Unit H 2700 shown in the System 2000 catalogue. Allows all System 4000 workpiece holders shown in this catalogue (with the exception of H 4410 and H 4415) to be used in HIRSCHMANN's Fixturing System 2000. This adapter also fits on the Vertical Unit H 4410 and on the Swivelling Unit H 4415. A direct mounting of the workpiece holders of the System 4000 to these units is possible. |
 |
H 8.88.4000 Adapter for
System 5000 For mounting the pallets of the Fixturing System 4000 to the Clampers H 8.811, H 8.812 etc. of the Fixturing System 5000. |
 |
H 50 K Single-package
System For the attachment of workpieces to the Support Plates H 4232.1 and H 4235.1. SICOMET 85 is suitable because of its short setting time (90-150 sec.) and high tensile shear strength (- 27 N/mm ^2). The surfaces to be glued must be absolutely free of grease. Use at room temperature. Storage at +20 C approx. 6 months, at -20' C approx. 12 months. Delivery: Work bottle - contents 50 gr. SICOMET is also used for attachment of small electrodes to the electrode shanks or to the MINIFIX pallets. |
 |
4000 Index Corrosion Inhibitors See HIRSCHMANN's full line of EDM Products (home) E-Mail HIRSCHMANN Regional Offices |
