|
|
 
|
H 4905 Presetting Cube Granite presetting cube with reference "0" column for indicating workpieces true on the X and Y axis, to be used on a surface plate. It can be placed on two sides ground to the centering Vee block, and is suitable for presetting small workpieces. The multiholders of the Fixturing System 2000 can be used on the presetting work station with the Adapter H 4380, mounted on the basic beam. |
|
H 4900 Presetting Work Station The presetting work station is delivered completely with a sturdy steel drawer cabinet and a granite surface plate 600 x 500 x 70 mm (23.6" x 19.7" x 2.8") of accuracy class 0. Includes a support table with a basic beam, a movable "B" Beam Clamper H 4300 and a small reference column for supporting the workpieces during clamping process. The opposite guide beam, aligned parallel to the basic beam, serves as straight edge for indicating workpiece true. H 4901 Presetting Work StationSame design as for H 4900, but without a cabinet. H 4902 Presetting Work Station Delivered with the support table with basic beam, clamper, small reference column and guide beam, for selfassembly on an existing granite surface plate. Other preset workstations are available upon request. |
 |
H 100R.NC Rotary Table For vertical and horizontal use on the Wire EDM. Stainless steel and sealed against
all dielectrics. Direct measurement by Heidenhain encoder ERN 480/3600 Imp located on the rotary axis. Workpiece mounting plate/turnable round
100mm (3.94") Indexing accuracy ±25" Overall indexing error ±25" Repetitive accuracy ±10" Max. speed 20 min-1 Intern. protection for rotary dividing table IP 68 Weight approx. 18 kg (39.7 lbs) |
| H 1625.3 CNC
Control Same design as for H 1625, but including pneumatic control for the table brake.
|
 |
4000 Index Corrosion Inhibitors See HIRSCHMANN's full line of EDM Products (home) E-Mail HIRSCHMANN Regional Offices |
