|
|
|
H 4300 "B" Beam Clamper
(manual) Manual clamper for the precise loading of the M-, P- and 3D-pallets on the "B" beams. All of the clampers shown on this page incorporate HIRSCHMANN's well-known centering Prizms and Z-support system. The manual clamper is provided with a safety latch thatholds the pallet in the position until it is secured. This clamper, or several clampers, are secured with three screws on the basic "B" beam, at any position in steps of 25 mm (1 "). Max. workpiece weight, with the workpiece
holder, 35 kg (77.17 lbs) |
|
H 4000 M-Clamper (manual) This Manual clamper is similar to the H 4300 but mounts directly to the machine table. The front surface is ground for axis alignment. The clamper is provided with two clearly visible positioning guide lines to make the manual loading of the pallets easier. Safety latch is also included. max. workpiece weight, with the workpiece holder 35 kg (77.17 lbs)Positioning/repetitive accuracy < 0.002 mm (0.00008") |
|
H 4100 P-Clamper (pneumatic) Pneumatic clamper with central power clamping allaows automatic or manual loading of the H 4105 Pallets and H 4110 3D-Pallets. Safety latch is also included. This clamper is normally used for the automatic workpiece changing with the EROBOT Workpiece Changer. Max. workpiece weight, with
workpiece holder 35 kg (77.17 lbs) 3 m of synthetic hose, 4 mm dia. (0. 16") are included in the delivery. |
 |
H 4101 Pneumatic Control Unit Manual control unit (valve) for the activation of
functions (opening, clamping, cleaning) of the Pneumatic Clamper H 4100. |
 |
4000 Index Corrosion Inhibitors See HIRSCHMANN's full line of EDM Products (home) E-Mail HIRSCHMANN Regional Offices |
