Manual Tool Clampers
For mounting below the quill of manual machines. It serves as adapter between machine and electrode holders.
With central flushing and connection on the right side.


H 8.11 Tool Clamper
The rear of the flange is ground parallel to the centering Vee block as an alignment surface.

Positioning accuracy 0.002 mm (0.00008")
Clamping force 2500 N
Permissible electrode weight 100 kg (220.5 lbs)
Permissible working current 120 A
Weight 3.7 kg (8.16 lbs)

H 8.12 Tool Clamper
Round, with four M 8 fastening screws, and external flushing connection for internal flushing.
Positioning accuracy 0.002 mm (0.00008")
Clamping force 2500 N
Permissible electrode weight 100 kg (220.5 lbs)
Permissible working current 120 A
Weight 3.5 kg (7.72 lbs)

H 8.80/65 Extension, 65 mm long
H 8.80/150 Extension, 150 mm long
Used as extension between too[ clamper and electrode holder.
All electrode holders, also the electrode holders without Z-supports can be used in the lower centering Vee block.
With internal flushing.
The extensions can be loaded in magazines.
Minimum spacing of the magazine forks 136 mm (5.35").
Weight: 2.5 kg (5.51 lbs) or 3 kg (6.61 lbs).