Electrode Machining
To machine the electrodes mounted on pallets or in holders economically and precisely the pallets and holders are held in these clampers.
When using pallets and holders the Pallet Holder H 8.811 or H 8.811.1 must be available in each workshop.


H 8.811 Pallet Clamper
With four precision-ground contact surfaces, also used for the alignment on the machine (the dimension from the center to the contact surface is engraved). Positive clamping.

Positioning accuracy 0.002 mm (0.00008")
Clamping force 10000 N
Weight 3.5 kg (7.72 lbs)

H 8.811.1 Pallet Clamper
The same as H 8.811, but with additional Z-supports for the large pallets from H 8.128.

Weight 6.5 kg (14.32 lbs)
Both suitable for use in dielectric.

H 8.812 Pallet Clamper
For heavy machining work, especially on workpieces on Pallets H 8.88, H 8.128 and H 8.180. With mechanical, central power clamping and four precision-ground contact surfaces, also used for the alignment of the H 8.812 on the machine (the dimension from the center to the contact surface is engraved).

Clamping takes place by a central threaded screw and not by the clamping journal.

Positioning accuracy 0.002 mm (0.00008")
Clamping force 25000 N
Weight 12 kg (26.46 lbs)

H 8.813 Pallet Clamper (for lathe)
Same design as for H 8.812, but equipped with a cylindrical mounting aligned on the centering Vee block for clamping in the jaw-type chuck of the lathe.

Weight 10.5 kg (23.15 lbs)
Suitable for use in dielectric.

H 8.16 Pallet Clamper
Same design as for H 8.811, but cylindrical, for rotating use. Equipped with sunk hexagonal-socket, clamping screw, centering seat and four M 5 fastening screws.


H 8.16.1 Pallet Clamper
Same design as for H 8.16, but with protuberant hexagonal-socket, clamping screw as for H 8.811, for stationary use. Both suitable for use in dielectric.


H 4205 Adapter Peg for System 4000
The Pallets H 4005, H 4105 and H 4110 M of the Fixturing System 4000 can be clamped with this adapter peg, which is clamped in the Pallet Clampers H 8.16 and H 8.16-1.

This allows universal use on the Fixturing Systems 4000 and 5000.



H 8.90.2 Tool Clamper
With taper shank ISO 40 and S 20 x 2 external thread.
H 8.91 Tool Clamper
With taper shank MK4 and M 16 internal thread.
H 8.91.1 Tool Clamper
With taper shank MK5 and M 20 internal thread.
H 8.92 Tool Clamper
With cylindrical shank 0 25 mm (0.984"). Clampers with other shanks on request.
H 8.80 Machining Dividing Head
With four precision-ground contact surfaces for the alignment on the machine (the dimension from the center to the contact surface is engraved).360° indexing, fixed vernier - adjustable scale ring. 48 indexes 7.5° ± 30" hydraulic clamping.

Indexing accuracy = setting accuracy < 51'
Radial runout < 0.01 mm (0.0004")
Clamping force 10000 N
Weight 12 kg (26.46 lbs)
Not suitable for use in dielectric.