For NC-controlled machines and for automatic electrode and workpiece change with 68 (2.677"), 90 (3.543") or 136 mm (5.354") spacing of the magazine positions.

The tool clampers only differ by size and position of the connections, of the clamping force and whether they are equipped with MINIFIXplus or not.



H 8.11.1 Tool Clamper, without MINIFlXplus

Compressed air and dielectric are supplied from the right side. The rear of the flange is ground as an alignment surface parallel to the centering Vee block.

Positioning and repetitive accuracy 0.002 mm (0.00008")
Clamping force 2500 N
Permissible electrode weight 100 kg (220.5 lbs)
Permissible working current 120 A
Compressed air, min. 6 bars
Weight 7.5 kg (16.54 lbs)

H 8.11.7 Tool Clamper, without MINIFlXplus
H 8.11.17 Tool Clamper, with MINIFlXplus
Compressed air and dielectric are supplied from above. The rear of the clamper is ground as an alignment surface parallel to the centering Vee block.

Positioning and repetitive accuracy 0.002 mm (0.00008") Clamping force (clamper without MINIFlXplus 2500 N Clamping force (clamper with MINIFlXplus 1500 N Permissible electrode weight 100 kg (220.5 lbs)
Permissible working current 120 A
Compressed air, min. 6 bars
Weight 2.5 kg (5.51 lbs)

H 8.11.10 Tool Clamper, without MINIFlXplus
H 8.11.20 Tool Clamper, with MINIFlXplus
Compressed air and dielectric are supplied from above. The rear of the clamper is ground as an alignment surface parallel to the centering Vee block.

Positioning and repetitive accuracy 0.002 mm (0.00008")
Clamping force (clamper without MINIFlXplus) 2500 N
Clamping force (clamper with MINIFlXplus) 1500 N
Permissible electrode weight 100 kg (220.5 lbs)
Permissible working current 120 A
Compressed air, min. 6 bars
Weight 2.15 kg (4.74 lbs)
H 8.11.18 Tool Clamper, without MINIFlXplus
Design as for H 8.11.7 and H 8.11.10, but with additional Z- supports at the outer edges for the use of large and projecting electrodes on Pallet H8.128 and H 8.180.
Positioning and repetitive accuracy 0.002 mm (0.00008")
Clamping force 10000 N
Permissible electrode weight 200 kg (440 lbs)
Permissible working current 120 A
Compressed air, min. 6 bars
Weight 8 kg (17.64 lbs)

Magazine forks fitting into these tool clampers, on request