Palletizing System 8000 < < (click for pdf)
Integrated Workpiece Management for Manufacturing

The Basis

This comprehensive fixturing system is the base for fast, economical and precise manufacturing. As reference system on milling and drilling machines, surface and jig milling machines and sinking EDMs the Palletizing System 8000 is used for fixture and workpiece palletizing. Accuracy, efficiency and reduction of the set-up time are the main reasons for using this palletizing system. The pallets can be changed manually or automatically with the Workpiece Changer EROBOT to allow an economic manufacturing.

The Palletizing System 8000 is compatible with the Fixturing System 4000 for wire EDMs and with the Fixturing System 5000 for sinking EDMs.

Characteristics

• Positioning and repetitive accuracy 0.002 mm (0.00008")
• For weights up to 300 kg (661 lbs)
• Integrated x-y-z-references
• One piece and therefore not susceptible to shocks
• Solid, compact, economical
• Manual and automatic workpiece change with the Workpiece Changer EROBOT
• Compatible with the Fixturing Systems 4000 and 5000 for Wire and Sinking EDMs.

Overview

Warranty

We provide a 12-months warranty for all fixturing system parts produced by us, starting from the invoice date, and assuming correct use and maintenance as specified. The warranty is restricted to replacement or repair, free of charge, of any defective parts. Claims going beyond that shall not be considered.

Warranty claims shall be submitted without delay and in writing.

Quality According to DIN EN ISO 9001

All HIRSCHMANN GMBH products are produced using the latest production methods, and are subject to quality assurance measures as per DIN EN ISO 9001 both during production and in the product stage.

Precision

The individual tool planes incorporate hardened (except the Pallets H8.88A, H8.128A) and precision ground centering Vee blocks and separate Z-supports. This assures position centering of the pallets and holders. When the reference points are in alignment, a repetitive accuracy (consistency) of 0.002 mm (0.00008") is achieved, measured 100 mm (3.937") below the tool plane.

Technical Modifications

As all products shown in this catalogue are subject to continuous further developments, we reserve the right for technical modifications.