|
Pneumatic Pallet Clampers
for the fixture of pallets and holders of the series HPS80 • Manual and automatic handling • Not affected by dirt because of continuous seal • Alignment surface is parallel to the centering block • Cleaning nozzles for the automatic cleaning |
 |
H 8.11.3 Pallet Clamper
Central clamping is normally closed. The clamping is opened pneumatically. Positioning and repetitive accuracy 0.002 mm (0.00008") Clamping force (without pneumatic assistance) 10000 N Clamping force (with pneumatic assistance) 18000 N Compressed air 6 bars Weight 11 kg (24.25 lbs) 3x3m pneumatic hoses are included in the delivery. H 8.11.3.3 Pallet Clamper H8.11.3 with two positioning bores 20H7, spacing 200 mm (8.87"). |
 |
H 8.86 Power Clamper
For heavy machining work. Same design and function as for H8.11.3, but with increased clamping force for Clamping Journal H8.61 1. Positioning and repetitive accuracy 0.002 mm (0.00008") Clamping force (without pneumatic assistance) 10000 N Clamping force (with pneumatic assistance) 25000 N Compressed air 6 bars Weight 11 kg (24.25 lbs) The Clamping Journal H8.611 is supplied with H8.86. H 8.86.3 Power Chuck H8.86 with two positioning bores 20H7, spacing 200 mm (8.87"). H 8.611 Clamping Journal This clamping journal is used when pallets and holders are mounted on Power Clamper H8.86 and is replaced by the Clamping Journal H5.61 1. |
 |
H 8.11.20M Pallet Clamper for 3D Measuring Centers
Pneumatic Pallet Clamper with integrated, manual pneumatic control for use at a 3D measure center ( not usable for milling, eroding aso.). Positioning and repetitive accuracy 0.002 mm (0.00008") Clamping force 1500 N Max. load 100 kg (220 lbs) Compressed air 4,5 - 6 bars Weight 11 kg (24.25 lbs) 3m pneumatic hoses (6x1 mm) are included in the delivery.
|